Ask the Experts / Need Help
- 01-July 17
-
RCThibo Offline
How can I remove the base under flat rides? Like here:
https://www.nedesign...ching-year-500/
I need to know how to do this for a swinger, in case it's different for specific rides.
-
G Force Offline
Lower the whole flat ride 1 unit with tile inspector, its not the cleanest solution but currently the best.
-
RCThibo Offline
Thank you, but when I try it it looks like this:
Is there any way to fix those brown patches?
-
G Force Offline
Tile inspector doesn't work unfortunately. You have to make the ground flat, or place path over it.
It's a pretty limited mechanic, there isn't much you can do with this. -
Sephiroth Offline
Pretty sure you can insert a corrupt element and then place it just right in the drawing order with the tile inspector to make the base disappear tile by tile. Haven't tried something like that since the inspector was new so play around and see what works.
EDIT: This would be done without lowering the ride. -
X7123M3-256 Offline
I tried it - it will make the base disappear, but it also hildes the ride sO not really wha you want. Lowering the ride 1 unit worked for me. -
Terry Inferno Offline
As G Force mentioned, the brown patches are there because the ground is uneven. Lowering the ride on the sloped squares just places the base between the lowest and the highest points of the ground on that square, which is why you can still see the brown areas.
The aforementioned technique of lowering the ride 1 unit works on flat ground.
Tags
- No Tags