Ask the Experts / Block brakes and a weird bug.

Can anyone help me, the coaster worked before. I don't know what happened but it does not work anymore with 2 trains (it runs with 1 though).

 

https://gyazo.com/e2...a4fac0192e06c69

 

There is a MCBR but withouth a block brake.

 

Also, I dont really know what happened here but from 1 side the hill looks like : https://gyazo.com/8f...650a1e81aa72c27

 

And the other side 
: https://gyazo.com/b7...a3e36724866b2ac

 

I tried to fix that with MOM, but then I had the same bug; but the other way around. ( and I cant delete the part nor click it)

 

Thanks in advance.

Not sure about the first one, but regarding the second the issue is due to the fact that diagonal pieces are spread over four squares. Pic to demonstrate: http://i.imgur.com/vAMaVZx.png

The red square is where your track has been lowered one unit while the rest is at normal height. You just need to raise that bit with MOM.

If you double close it and try it again does it work? Stops like that are usually caused by zero clearencing and they can be easily reset.

Thanks extreme, that fixed the bug on the hill. 

 

@Bill, I tried doing that, but it did not fix it. I also rebuild the lift hill and the brake and station sections. But none of it worked. I could PM the file to someone to take a look at it. gdb tried but could not find it.

Maybe try adding another block brake in your brake run. It could be a case of too few blocks.

I tried, did not work either. I even deleted the coaster and rebuild the same using screenshots, and it has the same problem.

I could try to help you out if you send me the file.

 

Edit: Had a look at the screenshot. It might have something to do with the monorail track. Have you tried to delete it?

Seems the junior coaster caused it, thanks Lagom.

 

Weird thing is, I rebuild those parts you removed again, and now it works. Weird.