Custom Scenery Exchange / Split's Splendid Scenery Stuff

Hi all,

Gathering up my release-ready creations in this post. Several objects listed are not quite ready for release (or a part of a set though not yet created), but are in the works as part of my solo - these objects are marked "U" for Unfinished. I hope to be able to release a majority of these objects way before I'm completely done with my solo, which I project will be finished sometime in the year 3873.

 

Adding downloads and cleaning up post in a moment

 

 

________________________________________________________________________

 

INFRASTRUCTURE

 

Road arrows (path object)   SVRARPT2.DAT (41.59KB)
downloads: 23

      

 

Straigt arrows are obtained by checking the box corresponding to the direction you need. For turns, the box opposite of the traveling direction needs to be checked, together with the middle box on the side you want the arrow to point and the corner box corresponding to the end you want the arrow to point.

 

 

Crosswalk Path   SVCRWPTH.DAT (44.63KB)
downloads: 22

 

A path with a crosswalk look. Has crosswalk sprites for straight and diagonal.

 

Offsets to correspond to a 1/4 tile placement can be obtained by checking all boxes along the side you want to offset to. This also means that 2-wide paths will be centered along the inside of the two tiles.

 

Diagonal paths are obtained by building in a zig-zag pattern.

 

 

Manhole Cover (U)

 

Need a bit more contrast.

 

 

Simple Streetlight (U)
Centered along tile side, centered diagonal, corner diagonal

 

Simple-looking streetlights.

 

 

Decorative Streetlight (U)
Centered along tile side, centered diagonal, corner diagonal

 

Decorative streetlights

 

 

3x1 Large Streetlight (U)

 

3x1 large streetlight centered on the middle tile, for use on highways etc

 

 

Road Refuge Blocks   RoadRefugeBlocks.zip (1.25KB)
downloads: 16

1/4 long, 1/8 long x2

 

Set of narrow road refuge blocks, one 1/4 object and 2x 1/8 objects. Pairs well with the crosswalk path.

 

 

Colorable Brick Path Raised (U)

 

Brick path texture curved set raised 1h.

 

 

Sidewalk Curb Set (U)

Straight 1/4, Straight Tile-length wall, Diagonal 1/2, Diagonal Full Tile, Curved Inner 2x, Curved Outer 2x, Half Diagonal, Gentle Slope 2x

 

 

 

Half-Diagonal Dotted Road Lines x2   HalfDiagDottedRoadlines.zip (1.14KB)
downloads: 16

 

 

Shallow Slope (U)
Lead-In, Lead-Out, Single-tile Lead-In & Out

 

Needs some more shading work before release-readyness.

 

 

Road Signs (U)

2x1 Centered, Wall

 

These are mostly Mulder's signs centered on the edge of a 2x1 area. Some of them such as the crosswalk sign are double sided, as they can be placed in between lanes. I have also made an arrow sign (double-sided 2x1 and wall), as well as modified the yield sign to be yellow, which are used in Sweden. More signs might be planned.

 

 

Traffic lights (based on Six Frags traffic lights) with poles (U)
Wall object aligned to Mulder's road signs, 2x1 centered
 

 

Free-standing traffic lights. The 2x1 object has mapping for an upper green (or whichever color you like) and a a lower red (or whichever color you like) 
 

 

________________________________________________________________________

 

BUILDING DETAILING

 
Slanted Roof Detail (U)

 

A slanted (normal steepness) chimney or vent-like roof detail. Will probably make more variations.

 

 

Centered Awning   SVAWMCL1.DAT (1.98KB)
downloads: 16

 
Centered Small Step   SVSMSTEP.DAT (1.25KB)
downloads: 17

 

 
Thin Round Pole (Use for vertical gutters on buildings, for example)   ThinRoundPoles.zip (775bytes)
downloads: 14

1h & 4h

 

 

________________________________________________________________________

 
MISC
 

One-way gates   SV1WAYGT.DAT (2.99KB)
downloads: 27

 

 

LED String Lights set   LEDStringLights.zip (4.15KB)
downloads: 20

Straight 1/4, Straight tile-length wall, Diagonal, Half Diagonal, Gentle slope (u), Normal slope (u)

 

 
Scandinavian Animated Recolorable Flag & Lighter Centered Flagpole (U)

 

Flags with an offset lying cross symbol, as often featured in Scandinavian flags. Based on RCTNW's flag, however I thought the flagpole was too dark so I lightened it up, which in turn required a new flagpole object. I could probably be convinced to adjust it back to the original shading in order to remove the need for yet another pole object, but someone would have to convince me as it'd be a bit of work.

 

 

3x3 Cylinder (U)

 

A hollow, complete 1h 3x3 cylinder, shading intended to match vanilla plain walls.

 

 

Simple Bench & Table   SVBNWTB1.DAT (7.88KB)
downloads: 17
 
 

 

Container Texture Set   ContainerTextureSet.zip (3.82KB)
downloads: 17

1/4 block, 1/4 wall, 1/4 wall corner, Wall, Flat 1/4 roof aligned to bottom of clearance, Diagonal (U)

 

 
Glass Tunnel Set   GlassTunnelSet.zip (7KB)
downloads: 18

Straight, Straight End-Piece, Diagonal, Curves x6

 

A rather large set of objects to construct glass tunnels which can follow flat track (except S-bends). It can be difficult to find the correct combinations for curves, but it has all the pieces needed.

 

 

Persian Rug   SVPRSRUG.DAT (8.8KB)
downloads: 13
 

 

 

Liampie Brick Wall Triangular x2 (2 sides needed)   LiamBrickWallTriangular.zip (5.78KB)
downloads: 16

 

Liam's Brick Texture triangularized (normal slope), for finishing up gabels.

 

 

Queue Railings Gentle Slope x2 (2 sides needed) (U)

Gentle-sloped queue railings. I recently noticed the shading might be based on the wrong railing object and needs to be fixed first.

 

 

Turnstile (wall object)   SVTRNSTW.DAT (3.26KB)
downloads: 24

 

 

Multi-color pebble path:   SVSPTHRM.DAT (9.79KB)
downloads: 20

 

Similar object already exists but I modified the mapping to cover more of the original pebble sprite, and now it's possible to achieve more subtle variations:
 
 

_______________________________________________________________________________

 

NOT YET STARTED OR IN EARLY DEVELOPMENT:

 

Several seating & table objects, mostly for outdoor settings 
 

Several custom signs

Reserved

Thank you! I have pieces of these sets and they are some of my favorites. Your work is fantastic. Looking forward to see your larger project.

Things like the Scandinavian flags and and the traffic signs, are they colourable?

wtf dude this stuff is wild.

 

amazing work

Great stuff split, looking forward to the shallow slope objects and curb object sets!  Want to use them in my park!

gee! very cool, i loved

Love the decorative Streetlight. Any idea when the rest of the items are going to be released?

Great work! In addition to each object having a DL, could you please put all these objects on a park file and post that as a single DL to everything?

pebble path? nice. could have used those glass curves in underground actually...

Great work! In addition to each object having a DL, could you please put all these objects on a park file and post that as a single DL to everything?

Yeah, or just put them all in 1 .zip? Great work, just a hassle to download everything separately